Mounting the Dome Camera Using the Side Cable Entry 20
3. Slide the side cable cover off the mounting adapter.
4. Depending on the conduit used, make the required adjustments to the side cable entry hole:
l
If you are using an interior conduit, install the side conduit cover on to the mounting adapter. Proceed
to step 5.
l
If you are using an exterior conduit:
o
Install a conduit plate to an external conduit adapter. Ensure the plate is compatible with the
size of conduit used.
o
If you are installing an environmental model, you may need to cut off part of the rubber gasket
on the mounting adapter to make room for the plate.
To Next Page
Loading...
