Installing the Dome Cover 42
Installing the Dome Cover
Before installing the dome cover, we recommend that you first connect to the camera and adjust
the aim, zoom, and focus so that the camera covers the required field of view. For more
information, see:
l
Connecting to the Camera on page35
l
Aiming the Dome Camera on page39
l
Zooming and Focusing the DomeCamera on the next page
1. Align the dome cover screws with the screw holes in the camera base. Apply even pressure on the dome
cover and tighten the screws with the star-shaped driver.
If the optional Weather Shield accessory will be installed, only install the two screws closest to the mounting
adapter's side conduit.
2. (Optional) If installing the Weather Shield accessory, align it and the provided screw with the center screw
hole on the dome cover. If the captive screw is still in the center screw hole, unscrew it and discard it.
To Next Page
Loading...
