(Optional) Configuring microSD Card Storage 40
5. Rotate the azimuth control ring to set the image to the correct angle.
6. In the camera web browser interface or the Avigilon Control Center software, adjust the camera’s Image and
Display settings.
(Optional) Configuring microSD Card Storage
To use the camera's SD card storage feature, you must insert a microSD card into the card slot.
It is recommended that the microSD card have a write speed of class 10 or better. If the microSD card does not meet
the recommended write speed, the recording performance may suffer and result in the loss of frames or footage.
1. Insert a microSD card into the camera. Do not force the microSD card into the camera or you may damage the
card and the camera.
2. Access the camera’s web interface to enable the onboard storage feature. For more information, see the
Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
To Next Page
Loading...
