(Optional) Installing the Microphone Accessory 41
(Optional) Installing the Microphone Accessory
If you have a Microphone accessory (ACMICR-1001), attach it to the camera's microphone port
before installing attaching the dome. This accessory is only compatible with Indoor models and
should NOT be installed with an external audio device.
1. Seat the Microphone Accessory into the microphone slot located on the front of the camera base. Insert the
Microphone Accessory's connector into the microphone port beside the I/Oconnector block.
1. Pull the Microphone Accessory's wire around the hook as shown to hold it in place.