Settings page. For more information, see HDSMSmartCodec Technology Advanced Settings on the
next page.
1. Select the Enable check box to enable the HDSMSmartCodec features.
2. In the Min Image Rate field, enter how many images per second you want the camera to stream when
there is no motion in the scene.
3. In the Idle Keyframe interval field, enter the number of frames between each keyframe (between 1
and 254) when there is no motion in the scene.
4. In the Bandwidth Reduction drop-down list, select one of the options:
l
Low
l
Medium (recommended)
l
High
l
Custom
5. Click Apply to save your changes.
Viewing the RTSP Stream URI
On the Compression and Image Rate page, you can also generate the camera’s real time streaming protocol
(RTSP) address. The RTSP Stream URI allows you to watch the camera’s live video stream from any
application that supports viewing RTSP streams, including many video players.
Note: You can only generate the RTSP stream address in the camera web interface.
1. If the Generate RTSP Stream URI button is not available, the RTSP stream URI is auto-generated.
In the RTSP Stream URI area, the auto-generated URIs are displayed:
l
Unicast — select this option if you only plan to view the video stream from one video player at a
time.
l
Multicast — select this option if you plan to view the video from more than one video player
simultaneously.
To view the RTSP stream:
a. Copy and paste the generated address into your video player. DO NOT open the live
video stream yet.
b. Add your username and password to the beginning of the address in this format:
rtsp://<username>:<password>@<generated RTSP Stream URI>/
For example:
rtsp://admin:admin@192.168.1.79/defaultPrimary?streamType=u
Viewing the RTSP Stream URI 14
To Next Page
Loading...
Need help?
General
