User’s Manual
Long Page (<118”):
When you need to scan documents whose length exceeds
scanner maximum, please choose Long Page. Note if Long
Page is selected, the Multi-Feed Detection will not be
available. (Note: This option and the maximum allowable
document length vary due to type of scanner.)
When Long Page (<118”) is selected, be sure to specify
your document size in the Length and Width field.
Notice when scanning long page document:
1. Pull out the extension in the ADF Paper Tray.
2. Secure enough space around the Output Tray to
prevent the ejected paper from falling off the Output
Tray.
3. To ensure the performance, in color mode, set the
resolution to be 300 dpi or lower; in Black and White
mode, set the resolution to be 600 dpi or lower.
1. Depending on your system environments,
application, or your specified paper size, there may
be insufficient memory to perform scanning.
OverScan
Overscan allows you to add a specific margin at top and
bottom or right and left (Options vary based on the type of
scanner) of the edge of the image. This is used to reduce
possible corner clipping on the skewed images and often
applied to a batch of skewed document to be scanned in the
auto document feeder. Select a value between 0 and +5 mm.
Note the overscan result will not be shown in the Display
window and that the availability of the function varies based
on type of scanner.
To Next Page
Loading...
