User’s Manual
Pre-Feed
Choice: Enable, Disable. If enable is selected, you can set
the amount of time the scanner starts pre-feeding your paper
after your documents has been loaded into the feeder. The
default is disable. Note: The availability of this option varies
due to scanner model.
Transport Timeout
Set the amount of time the scanner will wait and then start
auto scan after the first scan job is completed. If you have
many separate documents need to be scanned at the same
scan settings, this feature is especially useful. The default is 0.
The value ranges from 0 to 30 seconds.
NOTE:
1. Within the specified timeout period, if you load your
document to the feeder, the scanner starts scanning
automatically.
2. If your scanner has a flatbed option and you place
your paper on the flatbed, after the timeout period,
you need to click the Scan button on the TWAIN
user interface to start scanning.
To Next Page
Loading...
