ScanCopier
7-1
7. PREVENTIVE MAINTENANCE
7.1 Cleaning
This ScanCopier is designed to be free of maintenance. However, it is suggested to perform
preventative maintenance in the shorter term either every 6 months or every 60,000 sheets scanning to
ensure a consistently optimum performance.
7.1 CLEANING THE DOCUMENT GLASS
There are times when the document cover and document glass is contaminated with ink, toner particles
or paper coatings. In this case, the ScanCopier will have to be cleaned frequently to ensure the best
performance.
Follow the cleaning procedure as below:
(1) Open the document cover.
(2) Dip a clean cloth with non-corrosion solvent like alcohol (purity above 99.5%).
(3) Wipe the document cover and the document glass gently as shown in Figure 7.1 Continue until
l the entire document cover and document glass is cleaned and observe that no cleanser remains
on the surface.
(4) Close the document cover. Your ScanCopier is now ready for use.
To Next Page
Loading...