Chapter 2: Port Access and Configuration Examples 25
6. Type set port_settings/ then press Tab to view the options for the Port_Settings parameter.
--:- port_settings cli-> set port_settings/<Tab>
rj45_pin-out status
serial_profile
7. Enter set port_settings/ status=enabled serial_profile=power then enter commit to set the
Serial_Profile to Power, enable the port and commit the changes.
--:- port_settings cli-> set port_settings/ status=enabled
serial_profile=power **:- port_settings cli-> commit
8. Enter show to verify the configuration.
--:- port_settings cli-> show
To Next Page
Loading...
