Servers view
Selecting Servers in the side navigation bar of the DSR Remote Operations window displays a
list of servers attached to the switch. The following items for each server will appear in the
content area:
• Name - The name of the server
• Port - The switch port to which the server is attached
• EID - The Electronic ID (EID) number of the IQ module attached to the server
Table B.3describes the icons in the Server view.
Table B.3: DSR Remote Operations Content Area Icons (Servers View)
Icon Description
A server that is powered up and has no established KVM Video Viewer sessions
A server that has an active KVM Video Viewer session
A server that is not powered up
A server that is powered up but cannot establish a KVM connection because the path to the
target device is blocked (for example, a cascade switch has only one user port and that port
is already connected to another target device)
Power view
Selecting Power in the side navigation bar will display a list of power device sockets attached
to the switch and their status. Table B.4 describes the icons in the Power view.
Table B.4: DSR Remote Operations Content Area Icons (Power View)
Icon Description
The power device socket is powered up
The power device socket is powered down
The power device socket is cycling
105 DSR® Switch Installer/User Guide
To Next Page
Loading...
