Avocent DSR - Enabling or Disabling Broadcasting

Features Purpose
Scan Enable
Begin scanning your target devices. Set up a target device list for scanning in the Setup
dialog box.
User Status View and disconnect users.
Display
Versions
View version information for the DSR switch as well as view and upgrade firmware for
individual IQ modules.
Reset PS/2 Re-establish operation of PS/2 keyboard and mouse.
Network Ping Ping a specific IP address.
To access the OSCAR interface Commands dialog box:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.
2. Click Commands to open the Commands dialog box shown in Figure 3.18.
Figure 3.18: OSCAR Interface Commands Dialog Box
Enabling or disabling Broadcasting
To turn Broadcasting on:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.
2. Click Commands to open the Commands dialog box.
3. Select the Broadcast Enable checkbox to activate Broadcasting.
Chapter 3: Local Port Operation 39