Adjusting mouse options
The Video Viewer window mouse options affect cursor type, Cursor mode, scaling, alignment
and resetting. Mouse settings are device-specific; that is, they may be set differently for each
device.
NOTE: If the device does not support the ability to disconnect and reconnect the mouse (almost all newer PCs do),
then the mouse will become disabled and the device will have to be rebooted.
Cursor type
The Video Viewer window offers five appearance choices for the local mouse cursor. You can
also choose no cursor or the default cursor.
In Single Cursor mode, the display of the local (second) cursor in the Video Viewer window
turns off and only the target device mouse pointer is visible. The only mouse movements that
appear are those of the target device remote cursor. Use Single Cursor mode when there is no
need for a local cursor. Figure 5.3 shows both the Remote Cursor and the Local Cursor
displayed in the Video Viewer window.
Figure 5.3: Video Viewer Window with Local and Remote Cursors Displayed
Table 5.3: Descriptions for Figure 5.3
Number Description
1 Remote Cursor
2 Local Cursor
78 DSR® Switch Installer/User Guide
To Next Page
Loading...
