• DSR/CD Mode: This option allows you to control how the DSR switch and CD lines
operate. Available options are Always on and Toggle. When in Toggle mode, DSR and
CD lines are turned off for one-half second and then turned on each time a module is
selected or deselected. The default value is Always on.
• Enter Sends: This option enables you to specify the keys that are transmitted when Enter is
pressed. Available options are <CR> (Enter), which moves the cursor to the left side of the
screen, or <CR><LF> (Enter-Linefeed), which moves the cursor to the left side of the
screen and down one line.
• Received: This option enables you to specify how the module translates a received Enter
character. Available options are <CR> (Enter) or <CR><LF> (Enter-Linefeed).
• Background: This option changes the screen’s background color. The currently-selected
color displays in the option line as it is changed. Available colors are Black, Light Grey,
Yellow, Green, Teal, Cyan, Blue, Dark Blue, Purple, Pink, Orange, Red, Maroon and
Brown. The default color is Black. This value cannot be identical to the Normal Text or
Bold Text value.
• Normal Text: This option changes the screen’s normal text color. The currently-selected
color displays in the option line as it is changed. Available colors are Grey, Light Grey,
Yel-low, Green, Teal, Cyan, Blue, Dark Blue, Purple, Pink, Orange, Red, Maroon and
Brown. The default color is Grey. This value cannot be identical to the Bold Text or
Background value.
• Bold Text: This option changes the screen’s bold text color. The currently-selected color
displays in the option line as it is changed. Available colors are White, Yellow, Green,
Teal, Cyan, Blue, Dark Blue, Purple, Pink, Orange, Red, Maroon, Brown and Light Grey.
The default color is White. This value cannot be identical to the Normal Text or
Background value.
• Screen Size: This option allows you to specify the screen’s text width size. Available
values are widths of 80 columns or 132 columns. The length for both widths is 26 lines.
The following options for the Terminal Application menu’s Configuration screen enable you to
define the function keys that will perform a selected action. To specify a new function key,
press and hold the Ctrl key, then press the function key that you want to associate with the
action. For example, if you want to change the Configuration (Config) Key Sequences option
from <CTRL-F8> to <CTRL-F7>, press and hold the Ctrl key and then press F7.
• Config Key Sequences: This option allows you to define the key combination that makes
the Terminal Application menu’s Configuration screen appear. The default key sequence is
Ctrl-F8.
110 DSR® Switch Installer/User Guide
To Next Page
Loading...
