Avocent DSR - Page 144

To Next Page

To Previous Page

For example: For Stop + A, press and hold Ctrl+Shift+Alt and press Scroll Lock, then F1 + A.

These key combinations will work with the serial USB IQ module (if your Sun system comes

with a USB port) as well as the Sun VSN and WSN IQ modules. With the exception of F12,

these key combinations are not recognized by Microsoft Windows. Using F12 performs a

Windows key press.

When finished, press and hold Ctrl+Shift+Alt and then press the Scroll Lock key to toggle Sun

Advanced Key Emulation mode off.

Special considerations for Japanese Sun USB and Korean Sun USB

keyboards (USB IQ modules only)

Japanese Sun USB and Korean Sun USB keyboards assign usage IDs for certain keys that differ

from standard USB usage IDs. If USB IQ modules are attached to your Sun servers, the Han/Zen

and Katakana/Hiragana keys on Japanese Sun USB keyboards and Hangul and Hanja keys on

Korean Sun USB keyboards must be accessed using alternate keystrokes.

Due to these keyboard-specific differences, keyboard mapping inconsistencies may be

encountered when switching between target devices using Sun VSN and WSN IQ modules and

target devices using USB IQ modules. These keys function normally if your Sun servers are

attached to the DSR switch using a VSN or WSN IQ module.

Table G.2 lists the keyboard mapping that will take place when a USB IQ module is used in

this setting.

Table G.2: PS/2-to-USB Keyboard Mappings

PS/2 Keyboard USB Usage ID Sun USB Keyboard

Korean Sun USB

Keyboard

Japanese Sun USB

Keyboard

Right-Alt 0xE6 AltGraph Hangul Katakana/Hiragana

Windows Application 0x65 Compose Hanja Compose