Figure 3.4: OSCAR Interface Menu Dialog Box
To choose the display order of target devices:
1. Select Name to display target devices alphabetically by name.
-or-
Select EID to display target devices numerically by EID number.
-or-
Select Port to display target devices numerically by port number.
2. Click OK.
Depending on the display method selected, the corresponding button will be depressed in the
Main dialog box.
To change how the OSCAR interface is invoked:
1. Select the checkbox next to one of the listed methods.
2. Click OK.
To set a Screen Delay Time for the OSCAR interface:
1. Type in the number of seconds (0-9) to delay the OSCAR Interface display after you press
Print Screen. Entering 0 will instantly launch the OSCAR interface with no delay.
2. Click OK.
Setting a Screen Delay Time enables you to complete a soft switch without the OSCAR
interface displaying. To perform a soft switch, see Soft switching.
Chapter 3: Local Port Operation 25
To Next Page
Loading...
