Support by selecting the Tools - Manual Video Adjust command in the Video Viewer window
menu or clicking the Manual Video Adjust button. This displays the Manual Video Adjust
dialog box. Video adjustment is a per target setting.
Users can also verify the level of packets per second required to support a static screen by
observing the packet rate located in the lower left-hand corner of the dialog box.
To manually adjust the video quality of the window:
NOTE: The following video adjustments should be made only on the advice and with the help of Avocent Technical
Support.
1. Select Tools - Manual Video Adjust from the Video Viewer window menu.
-or-
Click the Manual Video Adjust button.
The Manual Video Adjust dialog box appears. Figure 5.2 shows the dialog box, and
descriptions follow in Table 5.2.
Figure 5.2: Manual Video Adjust Dialog Box
Table 5.2: Descriptions for Figure 5.2
Number Description Number Description
1 Image Capture Width 8 Pixel Noise Threshold
2 Pixel Sampling/Fine Adjust 9 Automatic Video Adjustment
3 Image Capture Horizontal Position 10 Refresh Image
Chapter 5: The Video Viewer 75
To Next Page
Loading...
