Avonic CM70-IP User Manual

Attributes
Figure 38: WebGUI > SYSTEM > Attributes
Specifying a specific device name to be displayed in the OSD can be useful when using multiple cameras on the
same LAN. The Device-ID is always 1 (addressing is done via IP). The language cannot be changed.
Make sure these settings don’t interfere with other uses and services on the same network.
Click SAVE to apply your settings. A small confirmation dialogue appears in the bottom right corner.
Time
Figure 39: WebGUI > SYSTEM > Time
You can manually set the time and date, or synchronize the time and date via a computer or an external server
on the LAN or WAN.
Either click SAVE to apply your manual settings, or SYNC to synchronize the time and date.
37

Avonic CM70-IP Specifications

General

Brand	Avonic
Model	CM70-IP
Category	Security Camera
Language	English