- 19 -
Information SIM in the GSM module
Remaining Credit
It is possible to check the SIM Card remaining credit.
Digit User Code
Note: if the user code is associated to multiple sectors and the “Skip sector selection” option is
not active, you will be asked to select the sector to work in.
Press (1)
Press () repeatedly to the “XGSM” step
Press (ENT)
Note: If your credit is not available you will see a question mark (?)
Press (ESC) key to exit
Intensity of GSM Net
It is possible to check intensity of GSM Net.
Digit User Code
Note: if the user code is associated to multiple sectors and the “Skip sector selection” option is
not active, you will be asked to select the sector to work in.
Press (1)
Press () repeatedly to the “XGSM” step
Press (ENT)
Press () repeatedly to the “GSM eld level” step
Note: More sticks are displayed (up to 5), the stronger the signal is
Press (ESC) key repeatedly to exit
Expiry Date of Sim Card
It is possible to vary the expiry date of the Sim Card.
This operation is ncessary any time a SIM recharge is made, in order to have the control unit
warning about the Sim Card expiry date, whether enabled by the installer.
It is recommended to set the warning quite in advance in order to avoid any possible block by
the Provider.
Digit User Code
Note: if the user code is associated to multiple sectors and the “Skip sector selection” option is
not active, you will be asked to select the sector to work in.
Press (1)
Press () repeatedly to the “XGSM” step
Press (ENT)
Press () repeatedly to the “SIM expir. month”
Press (ENT)
Press (CLR) key to vary - Enter the required numerical value - Press (ENT) key to conrm;
Press (ESC) key repeatedly to exit