- 23 -
Commands with HELP text
You can perform any operations allowed by your code using a “HELP Text” menu
Digit User Code
Note: if the user code is associated to multiple sectors and the “Skip sector selection” option is
not active, you will be asked to select the sector to work in.
Press (1) key
Press () until the desired function and then press (ENT) to perform the function
Press (ESC) key repeatedly to exit
Panic Message
A500/A500Plus: Press the (F1) followed by (F4)
Fire Message
A500/A500Plus: Press the (F2) followed by (F4)
Medical Message
A500/A500Plus: Press the (F3) followed by (F4)
Polling the memory events
The memory events of the control panel can be displayed at any moment. The events shown will
only be the reference ones.
Digit User Code
Note: if the user code is associated to multiple sectors and the “Skip sector selection” option is
not active, you will be asked to select the sector to work in.
Press (MEM) The latest event will appear on the display, along with its date and hour.
By pressing () key, all the other events will be displayed in reverse chronological order.
By pressing (CLR) again, the string for the zone in alarm is displayed..
By pressing the (CLR) key, further information on the telephone number that had a suc-
cessful communication result can be obtained,
To exit the procedure, press (ESC)
To Next Page
Loading...