SURFACE|TALKBOX CONNECTIONS
OXYGEN 1000 & OXYGEN 2000 · User Manual · ENG
Differently by EQ and GAIN, FADER status is not associated with the source, it is
associated with the physical channel. Changing the source, the FADER
attenuation and the FADER position will not change.
ATTENTION:
It is possible to set AUX-1 and AUX-2 to be POST-Fader or PRE-Fader.
The FADER does not affect the signal in the PRE-FADER case.
3.2.2 OUTPUT LEDMETERS
From these 3 ledmeters you can see the audio level for the related following audio BUSS, from left to right:
PGM
SUB
PFL
To Next Page
Loading...