Section 2: Basic Installation
AXIS 700 User’s Manual 13
The Front Panel Indicators
The front panel indicators show the status of the AXIS 700. The
indicators have the following functions:
• Status – Flashes during startup. When the AXIS 700 is ready for
use, this light goes out. If lit, check the LCD for an error message.
• Busy - Will be lit when the AXIS 700 is allocated for use, and
when scanning is in progress.
• Network – Indicates network activity.
• Power – Indicates that power is connected to the AXIS 700.
Note:
❏ While the AXIS 700 is idle, the Power indicator should be lit, the
Network indicator should flash randomly, and the Status and
Busy indicators should be off.
To Next Page
Loading...
