Section 3: Configuring the AXIS 700
AXIS 700 User’s Manual 27
Section 3 Configuring the AXIS 700
This section shows how to configure the AXIS 700. The configuration
of the AXIS 700 is performed from a Web browser.
To access the AXIS 700 Home Page, the Internet address must be set
as described in “Basic Setup for TCP/IP” on page 18.
Notes:
❏ The Web pages created by AXIS 700's internal Web server are
compatible with most HTML 3.0 compliant Web browsers,
including Netscape Navigator and Internet Explorer.
❏ The values shown in the following screen dumps may vary from
the actual values of your AXIS 700, they are for example purposes
only.
❏ On-line help is available on the AXIS 700 configuration pages.
To Next Page
Loading...
