Appendix D: Technical Specifications
60 AXIS 700 User’s Manual
User Interface
Alphanumeric LCD display with 2 rows by 16 characters.
4 LED indicators signaling Status, Busy, Network, and Power.
7 keys for Menu, Up, Down, Enter, Send, Scan, and Cancel.
Menu-functionality for selecting Destination, Scanning profile, Paper
size, and Double-sided; Multiple selection of Destinations is possible.
Installation
Set Internet address from user interface or with ARP, RARP, BOOTP
or DHCP. For scan-to-e-mail and scan-to-file, configuring
destinations from a Web browser.
Network
Management
Configuration and Administration from a Web browser.
SNMP MIB-II
Security
Administrator’s login for configuration and administration.
Administrator specifies which destinations should be accessible.
Possible to set a default destination (and optionally no other) for fixed
application use.
Number of Users
Recommended that not more than 100 users share one AXIS 700. The
maximum number is limited by the EEPROM memory.
Software Updates
Flash memory allows central and remote updating of the AXIS 700
software over the network using FTP over TCP/IP.
Hardware
CPU: 32 bit RISC Controller (AXIS ETRAX)
Flash memory: 2 Mbytes
RAM: 2 Mbytes
EEPROM: 8 kbytes
Logical Connection
IEEE 802.2, IEEE 802.3, SNAP and Ethernet II frame types
simultaneously.
To Next Page
Loading...
