Axis A1001 - How to Reset to Factory Default Settings; Maintenance Instructions

AXISA1001NetworkDoorController
HowToCongureSmartIntego
Note
Makesurethatprerequisiteslistedhavebeenmet.
1.ClickBrowse...,selectthecsv-leandclickUploadle.
2.SelectaGatewayNodeandclickNext.
3.Apreviewofthenewcongurationisshown.Disablethedoormonitorsifneeded.
Note
Thedoormonitorsettingisenabledbydefault.Ifthesmarthandledoesnothaveadoor
monitoryouneedtodisableit.
4.ClickCongure.
5.Anoverviewofthedoorsincludedinthecongurationisshown.ClickSettingsto
congureeachdoorindividually.
Howtoresettofactorydefaultsettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultresetsall
settings,includingtheIPaddress,tothefactorydefaultvalues.
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Pressandholdthecontrolbuttonwhilereconnectingpower.See.
3.Keepthecontrolbuttonpressedfor25secondsuntilthestatusLEDindicatorturns
amberforthesecondtime.
4.Releasethecontrolbutton.TheprocessiscompletewhenthestatusLEDindicatorturns
green.Theproducthasbeenresettothefactorydefaultsettings.IfnoDHCPserveris
availableonthenetwork,thedefaultIPaddressis192.168.0.90
5.Usetheinstallationandmanagementsoftwaretools,assignanIPaddress,setthe
password,andaccesstheproduct.
MaintenanceInstructions
Tokeeptheaccesscontrolsystemrunningsmoothly,Axisrecommendsregularmaintenanceofthe
accesscontrolsystem,includingdoorcontrollersandconnecteddevices.
Domaintenanceatleastonceayear.Thesuggestedmaintenanceprocedureincludes,butisnot
limitedto,thefollowingsteps:
•Makesurealltheconnectionsbetweenthedoorcontrollerandtheexternaldevices
aresecure.
44