Axis A1001 Installation Guide

AXISA1001NetworkDoorController
LEDIndicators
LED
Color
Indication
Green
Steadyforconnectiontoa100MBit/snetwork.Flashesfor
networkactivity.
Amber
Steadyforconnectiontoa10MBit/snetwork.Flashesfornetwork
activity.
Network
UnlitNonetworkconnection.
GreenSteadygreenfornormaloperation.
Amber
Steadyduringstartupandwhenrestoringsettings.
Status
Red
Slowashforfailedupgrade.
Green
Normaloperation.
Power
Amber
Flashesgreen/amberduringrmwareupgrade.
GreenSteadywhennotenergized.
Red
Steadywhenenergized.
Lock
UnlitFloating.
Note
•TheStatusLEDcanbeconguredtoashwhileaneventisactive.
•TheStatusLEDcanbeconguredtoashforidentifyingtheunit.GotoSetup>
AdditionalControllerConguration>SystemOptions>Maintenance.
ConnectorsandButtons
Forspecicationsandoperatingconditions,seepage20.
I/OInterface
ReaderDataConnectors
Two6-pinterminalblockssupportingRS485andWiegandprotocolsforcommunicationwiththe
reader.Forspecications,seepage22.
ReaderI/OConnectors
Two6-pinterminalblocksforreaderinputandoutput.Inadditiontothe0VDCreferencepoint
andpower(DCoutput),thereaderI/Oconnectorprovidestheinterfaceto:
•Digitalinput–Forconnecting,forexample,readertamperingalarms.
•Digitaloutput–Forconnecting,forexample,readerbeepersandreaderLEDs.
Forspecications,seepage23.
18

Axis A1001 Specifications

General

Interface	RS-485
Built-in UPS	-
Maximum number of doors	2 door(s)
DC voltage range	10 - 30 V
Power consumption (typical)	26 W

Weight and Dimensions

Depth	45.3 mm
Width	180 mm
Weight	500 g