Axis P1344 User Manual

AXIS P1344 Network Camera
Detectors
Detectors
Camera Tampering
Camera Tampering can genera te an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely
defocused. To send an alarm, for examp le an email, an action rule must be set up.
To configure tamp ering:
1. Go to Detectors > Camera Tampering.
2. Set the Minimu m duration, that is, the time that must elapse before an alarm is gene rated. This can help prevent false
alarms for known conditions that affect the image.
3. Select Alarm for dark images if an alarm should be generate d if lights are d immed or turned off, or if the lens is sprayed,
covered, or rendered severel y out of focus.
4. Click Save.
To configure the pro duct to send an alarm when tampering occurs:
1. Go to Events > Action Rules.
2. Click Add to set up a new action rule.
3. Enter a Name for the action rule.
4. Under Condition,selectDetectors from the Trigger list.
5. Select Tampering from the list of detectors.
6. Optionally, select a sche dule and set additional conditions.
7. Select the action. To send an email, select Send Notification a
nd select a Recipient from the list of defined recipie nts.
Note
The While the rule is active option under Duration canno t be u sed with c amera tampering, since camera tampering does not
have a duration and once it has been triggered it will not automatically return to its untriggered state.
For more information on actions rules, see Events, on page 33.
Motion Detection
Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude
windows can be configured:
• Include windows — target specific areas within the who le video image
• Exclude windows —define areas within an Include window that should be ignored (areas outside Include w indows
a
re automatically ig nored)
Once configured, motion detection windows appear in the list of Detectors in Action rule setup. See Setting Up an Action Rule, on
page 33.
Note
Using the motion detection feature may decrease the product’s overal l performance.
29

Axis P1344 Specifications

General

Video Compression	H.264, Motion JPEG
Optical Zoom	No
Digital Zoom	Yes
Video Compression Formats	H.264, Motion JPEG
Frame Rate	30 fps
Image Formats Supported	JPEG
Ethernet LAN	Yes
Memory Card Slot(s)	No
Sensor Type	CMOS
Day/Night	Yes
Power Over Ethernet	Yes
Ingress Protection	IP66
Field of View	80°
Power	PoE
Network Interface	Ethernet
Camera Type	Fixed
Sensor Size	1/4"
Minimum Illumination	0.5 lux
White Balance	Auto, Manual
Signal-to-Noise Ratio (SNR)	50 dB
Supported Resolutions	640x480, 320x240
Streaming Capability	Multiple, individually configurable streams
Network Protocols Supported	IPv4/v6, HTTP, HTTPS, FTP, SMTP, Bonjour, UPnP, SNMP, DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Security Algorithms	HTTPS
Operating Temperature (T-T)	-10 °C to 50 °C
Aperture	F2.0
Operating Conditions	-10 °C to 50 °C
Storage Temperature	-20 °C to 60 °C