Axis P1344 - Recordings; Accessing Recorded Files; Continuous Recording Setup

AXIS P1344 Network Camera
Recordings
Recordings
TheAxisproductcanbeconfigured to record video continuously or according to an action rule:
• To start a continuous recording, see page 36.
• To set up action rules, see page 33.
• To access recordings, see Recording List, on page 36.
•Toconfigure came ra controlled storage, see Storage, on page 44.
Recording List
Recordings made to the SD card and network share are listed on the Recordings > List page. The list shows ea ch r ecor ding’s start
date and time, duration and the event that triggered the recording.
To play or download a recording, follow these steps:
1. Go to Recordings > List.
2. Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take
a long time to complete.
3. Select the recording.
4. Click Play to play the recording, or click Download to download the recording.
Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file
containing a m inimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped
with the date and time they were downloaded (that is, not the date the
recordings were made).
Note
To play record ings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter
can be downloaded from www.axis.com/techsup/software
For detailed recording and video information, select a recording and click Properties .
To remove a recording, select the recording and click Remove.
Continuous recording
The Axis product can be configured to c ontinuously save video to an SD card or network share. To prevent the disk from becoming
full, it is recommended to configure the d isk to automatically remove o ld rec ordings see Storage, on page 44.
To start a continuous recording, follow these steps:
1. Go to Recordings > Continuous.
2. Select Enabled.
3. Select from the SD card or network s hare from the Disk list.
4. Select a Stream profile to use for continuous recordings.
5. Click Save to save and start the recording.
36