Axis Q6035 - Page 10

AXIS Q6035 PTZ Dome Network Camera
Accessing the product
Select a PTZ preset position to steer the camera view to the saved position. See Preset positions,
on page 24
.
Click the Start Auto Track button to start autotracking directly from the Live View page. See
Autotracking, o n page 24 .
Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the
camera view to that position.
Zoom bar – Use the arro ws to zoom in and out, or click on a position on the bar to zoom to that position.
Focus bar – Use the arrows to focus the camera, or click on a position on the bar to set the focus position. Using the
focus bar will disable the product’s autofocus. To re-enable, use the PTZ control panel which is opened by clicking
the Ctrl panel button (see above).
Iris bar – Click on a position on the iris bar to change the degree to which the iris is opened. This will disab le the
product’s auto iris. To re-enable, use the PTZ control panel which is opened by clicking the Ctrl panel button (see above).
The PTZ controls can b e disabled under PTZ > Advanced > Controls,see Controls, on page 27 .
10