Axis W100 - Replace System Hardware

Axisbodywornsolution
Maintenance
Toremoveacamerafromthebodywornsystem:
1.GotoDevices.
2.Clickthecamerayouwanttoremove.
3.Openthecontextmenu
.
4.ClickRemove.
Important
Neverremovebodyworncamerasfromyourcontentdestination.AlwaysuseAXISBodyWornManagertoremovecameras.
Removeanextensionsystemcontroller
Note
•AlwaysremovetheextensionsystemcontrollerfromthesysteminAXISBodyWornManagerbeforeyouphysically
disconnectit.
•Whenyouremoveasystemcontrollerfromthebodywornsystem,allcontentistransferredtothecontentdestination,and
thesystemcontrollerisresettofactorydefaultsettings.
Toremoveanextensionsystemcontrollerfromthebodywornsystem:
1.GotoDevices.
2.Clickthesystemcontrolleryouwanttoremove.
3.Openthecontextmenu
.
4.ClickRemove.
Replacesystemhardware
Youcanreplacecamerasandsystemcontrollersinthebodywornsystem.
Replaceacamera
1.Dockthecamerathatyouwanttoreplace.
2.WaitforthestorageLEDonthecameratoturngreen,whichmeansthatallrecordingsaretransferred.
3.OpenAXISBodyWornManagerandremovethecamerathatyouwanttoreplace,seeRemoveacamera.
4.Undocktheoldcamera.
5.Addthenewcameratothesystem,seeAddcameras.
Replaceextensionsystemcontroller
Toreplaceasystemcontroller,thatispartoftheextendedbodywornsystem:
1.Removetheoldsystemcontroller,seeRemoveanextensionsystemcontroller.
2.Addthenewsystemcontroller,seeAddsystemcontrollers.
Replacesystemcontroller
Ifthesystemcontrollerthatyoucreatedthesystemonhasfailed,youmayneedtoreplacethesystemcontrollerandrestorethe
system,seeRestoreasystemwithasinglesystemcontroller.
24