1-3. Specifications of the Control Valve
Since the control valve contacts the process fluid, its specifications must be appropriate for
the process conditions and the purpose of use. The standard specifications for the AGVB and
AGVM are described in “Appendix A. Standard Specifications”.
CAUTION
The specifications of the control valve, such as the rated pressure and mate-
rial of the valve body and trim material, are determined by the conditions
of the fluid. Do not use the control valve for applications other than those
for which it was designed. Failure to comply with this caution may result in
burns or injuries due to high temperature or leakage of hazardous fluid.
This control valve must be used in compliance with all applicable safety
regulations, specifications, and standards.
1-4. Dimensions and Weight
The dimensions and weight of the AGVB and AGVM are indicated in “Appendix B.
Dimensions and Weight”. Please refer to it during installation, etc.
1-3
To Next Page
Loading...
