Azbil SDC45 - Page 58

3-4
Chapter 3. SP/EV BANK SETTINGS
Display Loop number
and SP group
( auxiliary display )
Item Settings and descriptions Initial
value
User
setting
Remarks
SP 1.03.
LSP Same as SP group 1 0 Same as SP group 1
E0 1 1.03.
Event 1 main setting 0
E0 1.SB 1.03.
Event 1 sub setting
E02 1.03.
Event 2 main setting
E02.SB 1.03.
Event 2 sub setting
E03 1.03.
Event 3 main setting
E03.SB 1.03.
Event 3 sub setting
E04 1.03.
Event 4 main setting
E04.SB 1.03.
Event 4 sub setting
E05 1.03.
Event 5 main setting
E05.SB 1.03.
Event 5 sub setting
E06 1.03.
Event 6 main setting
E06.SB 1.03.
Event 6 sub setting
E07 1.03.
Event 7 main setting
E07.SB 1.03.
Event 7 sub setting
E08 1.03.
Event 8 main setting
E08.SB 1.03.
Event 8 sub setting
P 1.03.
Proportional band 5.0
I 1.03.
Integral time 120
D 1.03.
Derivative time 30
OL 1.03.
Output low limit 0.0
OH 1.03.
Output high limit 100.0
RE 1.03.
Manual reset 50.0
P-C 1.03.
Proportional band for cool side 5.0
I -C 1.03.
Integral time for cool side 120
D-C 1.03.
Derivative time for cool side 30
OL.C 1.03.
Output low limit for cool side 0.0
OH.C 1.03.
Output high limit for cool side 100.0
OI 1.03.
Initial output of PID control 0.0
SP 1.04.
LSP Same as SP group 1 0 Same as SP group 1
E0 1 1.04.
Event 1 main setting 0
E0 1.SB 1.04.
Event 1 sub setting
E02 1.04.
Event 2 main setting
E02.SB 1.04.
Event 2 sub setting
E03 1.04.
Event 3 main setting
E03.SB 1.04.
Event 3 sub setting
E04 1.04.
Event 4 main setting
E04.SB 1.04.
Event 4 sub setting
E05 1.04.
Event 5 main setting
E05.SB 1.04.
Event 5 sub setting
E06 1.04.
Event 6 main setting
E06.SB 1.04.
Event 6 sub setting
E07 1.04.
Event 7 main setting
E07.SB 1.04.
Event 7 sub setting
E08 1.04.
Event 8 main setting
E08.SB 1.04.
Event 8 sub setting
P 1.04.
Proportional band 5.0
I 1.04.
Integral time 120
D 1.04.
Derivative time 30
OL 1.04.
Output low limit 0.0
OH 1.04.
Output high limit 100.0
RE 1.04.
Manual reset 50.0
P-C 1.04.
Proportional band for cool side 5.0
I -C 1.04.
Integral time for cool side 120
D-C 1.04.
Derivative time for cool side 30
OL.C 1.04.
Output low limit for cool side 0.0
OH.C 1.04.
Output high limit for cool side 100.0
OI 1.04.
Initial output of PID control 0.0