b2 electronic BA60 - Unpacking the Instrument

4 Unpacking the instrument
© b2 electronic GmbH DHV0017 b2 EN 17
4 Unpacking the instrument
The instrument is shipped in a well protected padded box. On either side of
instrument foam inserts are molded around the instrument. To prevent against
injury and equipment damage, adhere to the following instructions when
unpacking the instrument:
Step
Procedure
Example
1
Grasp the instrument around the front
and back.
Do not pick the instrument up from the foam
inserts as they may release causing the
instrument to fall.
2
With the foam inserts still intact, lift the
instrument, from the box and place it on a
stable surface.
3
Carefully remove foam inserts one at a time.
4
Check the instrument for damage that may
have occurred during transport. In the event
of damage notify b2 electronic GmbH and
the shipping company.
5
For future shipping or transportation, do not
discard the original shipment packaging.
Do not transport the instrument with
inserted test vessel!