b2 electronic BA60 - Page 30

7 Test Procedure
30 DHV0017 b2 EN © b2 electronic GmbH
Step
Procedure (Run Standard Test)
Example
Sample Number
Use the Up / Down arrows to enter Sample Number.
Up/down: Edit Character
Left: Delete Character
Right: Next Character
Click “OK” to continue
Test Active
The test cycle begins.
The BA automatically detects breakdowns and records
them as they occur in the sequence.
During the test the cursor is automatically on the
“Stop Test” field. To interrupt the test in progress,
click “OK” and the test will immediately terminate.