b2 electronic BA60 - Page 34

7 Test Procedure
34 DHV0017 b2 EN © b2 electronic GmbH
Step
Procedure (Withstand Test)
Example
Sample Number
Use the Up / Down arrows to enter Sample Number.
Up/down: Edit Character
Left: Delete Character
Right: Next Character
Click “OK” to continue.
Test Active
The test cycle begins.
The BA automatically detects breakdowns and records
them as they occur in the sequence.
During the test the cursor is automatically on the “Stop”
field. To interrupt the test in progress,
Click “OK” and the test will immediately terminate.
Test Result /
End Test
The test cycle ends.
The summary of the test results appear on the screen
and the test report is printed.
The test has ended.
To return to the main menu, click „OK“.