b2 electronic BA60 - Page 42

8 Instrument Care
42 DHV0017 b2 EN © b2 electronic GmbH
Step
Procedure (Paper Roll Replacement)
Example
5
Insert the “bent arrow” of the paper into the
printer mechanism guide just below the metal
plate section.
6
Verify that the paper roll is oriented so that it
feeds downward into the guide.
Although the paper will not feed all the way
through, it is important to ensure that the paper
is held by the printer mechanism guide.
7
Push in the hinged plate of the printer mechanism
carefully, making sure not to jam the paper.
A magnet will lock the printer in place.
8
Turn on the instrument.
9
The printer will automatically line feed and should
push the paper through the outside paper slot of
the printer housing.
If this does not occur, select “Paper Feed” from
the “Instrument Settings” menu.