BOSS Saw User Manual V1.0
5/9/2019
5. Press PLAY
6. The piece and yellow box should now be moved
a. Notice. The picture will not move with the piece. This is showing you where it will be AFTER the Cut,
Pickup, Move, and Drop
b. This is a protected process. It and anything programmed prior can NOT be SORTED or have anything
moved in the ISO LIST before it. So be sure to do this when you want it to happen in the ISO.
If you delete cuts, either from the ISO LIST or from PROJECTS, the slab will remain defined exactly how it was before the
deletion. If you need the defined slab to be whole again;
1. Menu
2. Slab
3. Restore
4. The slab will revert to its original shape.
To Next Page
Loading...