BOSS Saw User Manual V1.0
5/9/2019
Do not operate this equipment with personnel inside the perimeter guarding. Doing so can result in
great bodily harm including death. Make sure the machine is clear before executing a cycle!
The machine cutting table is intended for materials ONLY! Personnel should not climb, stand or
otherwise be on the cutting table. Doing so can result in great bodily harm including death. Make
sure the machine is clear before executing a cycle!
The BOSS Saw system must never be operated without the saw guard in place. Doing so can result
in materials being ejected from the saw blade which could result in injury or death.
Proper LOCKOUT/TAGOUT procedures must always be followed when servicing and/or maintaining
the BOSS Saw system. Be aware that live electrical circuits are present in the control cabinet
whenever the master disconnect is ON, regardless whether the E-Stop button is pressed or released.
To Next Page
Loading...