MODEL 300 COMBUSTION ANALYZER
Instruction 24-9223 1-1
1 INTRODUCTION
The Model 300 Combustion Analyzer is an efficiency analyzer designed
for medium to large, condensing and non-condensing, industrial burners.
A microprocessor controls the analyzer’s operation along with calculating
burner efficiency.
1.1 SCOPE OF MANUAL
The following information is provided in this manual:
1. INTRODUCTION Describes the instrument, and its front
panel controls
2. SET UP Describes how to prepare a new analyzer
for operation.
3. OPERATION Describes how to perform a combustion
efficiency test.
4. MAINTENANCE Provides information about maintaining
and caring for the instrument.
5. CALIBRATION Describes how to calibrate the O
2
and CO
sensors as well as optional NO
X
and SO
2
sensors, plus the temperature channel.
6. PARTS, ACCESSORIES List of replaceable parts and optional
AND DIAGRAMS accessories, plus wiring diagrams.
GLOSSARY Description of the technical terms used
in this manual.
To Next Page
Loading...
