Fyrite
InTech
Manual Overview
0024-9486 Rev 2 11
1.10. Specifications
Specification Description
Temperature
Storage: -20° to 50° C ( -4° to 122° F)
0° to 20° C (32° to 68° F ) optimal
Operation: -5° to 45° C (23° to 113° F)
Reference: 20° ± 2° C (68° ± 4° F)
Humidity Storage: 15 to 90% RH, non-condensing
Operation: 15 to 95% RH, non-condensing
Reference: 45 ± 10% RH, non-condensing
Pressure 1 atmosphere ± 10%
Weight 16 ounces (454 g) with batteries
Dimensions 8.0” x 3.6” x 2.3” (20.3 cm x 9.1 cm x 5.8 cm) (H x W x D)
Warm-up Time Minimum = 30 seconds; Maximum = 60 seconds
Gas Sample Flow
Rate
300 to 700 cc/min
Sensors O
2
Electrochemical (P/N: 0024-0788)
CO Electrochemical (P/N: 0024-7265)
Temp (Stack) K-Type thermocouple
Product Approvals
and Regulatory
Compliance
EN50270: (CE Mark) EMC tested in accordance with
European Directive 2004/108/EC .
EN50379: Standard for portable electrical apparatus
designed to measure combustion flue gas
parameters of heating appliances (Siegert only)
Parts 1 and 3.
RoHS Compliance
Case Construction High impact ABS plastic with co-molded rubber.
Protective rubber boot with molded-in magnets.
Display Monochrome with backlight
USB Connector Mini B (USB 2.0)
Memory 10 locations for storing test results
IrDA Port Protocol: IrDA-SIR Data Bits: 8 Stop Bits: 1
Baud Rate: 9600 Parity: None
To Next Page
Loading...
Need help?
General
