Operation Fyrite
InTech
Manual
42 0024-9486 Rev 2
Step Example Combustion Testing Procedure
purge component that clears the sensors of combustion gases.
11 Turn on the instrument to optionally print and/or evaluate saved test
results (based on your local codes and practices for combustion data and
CO levels).
12
To turn off the Fyrite
InTech, press and hold the POWER button until
you see the Shutdown timer. Wait for the purge function to complete
(you will hear the pump stop and the display will shut off).
Use the results of your combustion testing to assist in diagnosing any issues or
potential issues that may exist with the combustion system.
WARNING: CO gas is life-threatening and part of all combustion
To Next Page
Loading...
Need help?
General
