Configuration Fyrite
InTech
Manual
24 0024-9486 Rev 2
3.7. Setup Menu
Setup Menu Function
Access Temperature Units (°C or °F) to be used by the
instrument and for display and printing purposes.
Use the UP (
) and DOWN () arrows buttons to
highlight the desired choice.
temperature unit. Press ESC to quit without saving.
Smoke Number (Siegert only) is used to calculate and
display an average smoke value based on 3 smoke test
results that are entered by the user. A sample smoke
scale is shown below.
Perform 3 smoke tests then enter the results in the 3
smoke number parameters shown below.
Use the UP () and DOWN () arrow buttons to
highlight smoke number 1, 2, or 3, then press ENTER.
Use the LEFT () and RIGHT () arrow buttons to set
the smoke number (0-9) that most closely matches the
numerical value on your smoke scale for that sample.
Press ENTER when finished. The average smoke
number is displayed, and will be included on printouts.
To Next Page
Loading...
Need help?
General
