Fyrite
InTech
Manual Overview
0024-9486 Rev 2 3
1.4. Product Overview
The Fyrite
InTech
is a portable hand-held combustion analyzer for use in
residential and light commercial applications. It is intended to be used by:
• HVAC contractors
• home inspectors
• maintenance personnel
• energy auditors
to conduct combustion efficiency analysis on residential and light commercial
furnaces and appliances in the worldwide market.
The instrument is supplied with all of the following components:
• probe and hose assembly
• four disposable “AA” alkaline batteries
• soft or hard carrying case (depending on model)
• factory-calibrated and installed sensor(s) as ordered
and, depending on the model and kit, some or all of the following:
• rubber boot
• spare filters
• Fyrite
User Software (FUS)
• USB cable (type A to mini B)
• Infrared Data Association (IrDA) printer with four disposable “AA”
alkaline batteries
• printer paper
1.5. North American (NA) vs. Siegert (S) Combustion Equations
Though the combustion process is fairly standardized across the globe, a
combustion analyzer intended for worldwide use demands a degree of
flexibility for a few regional preferences. The Fyrite
InTech
provides a North
American configuration and a Siegert configuration (see page
32) to address
these and other needs, which are contrasted below.
NOTE: Detailed differences between North American and Siegert
configurations are noted where appropriate in this manual.
To Next Page
Loading...
Need help?
General
