Configuration Fyrite
InTech
Manual
34 0024-9486 Rev 2
3.8. Calibration Menu
Calibration Menu Function
Calibration is performed by applying known values and
accessing the password-protected menu items. When
the Calibration Menu is selected, the user must enter a
4-digit numeric security code in order to proceed to
the calibration options. The default password is 1111.
Use the UP () and DOWN () arrow buttons to scroll
through numerals 0-9 until the desired numeral is
reached. Press ENTER to advance to the next position
of the password. Press ENTER after all four digits are
set. Press ESC to return to the SETUP MENU.
NOTE: The calibration password can be
changed through the Fyrite
User
Software (FUS).
Refer to Chapter 5 (page 48) for additional screens and
calibration procedures.
To Next Page
Loading...
Need help?
General
