Bad Boy 4035CH 2021 - Tires, Wheels and Ballast; Tire Type

5
-
23
OPERATION
5
9. The PTO shaft should not be inter-
fered by any surrounding parts.
CAUTION
•
If someone is entangled in the
rotating part, it can cause a fa-
tal injury. Always wear protec-
tive gear and install the safety
shields and guards to the drive
line. Don’t wear loose clothing.
•
Do not remove the installed
protective cover of the PTO
drive shaft without permission.
If working with this protective
cover removed, it can cause
a severe injury. Refer to the
warning decal on the cover.
TIRES, WHEELS AND BALLAST
TIRE TYPE
Though the tire pressure is factory
set to the prescribed level, it naturally
drops slowly in the course of time.
Thus, check it everyday and inflate
as necessary.
(1) Tire (2) Wheel nut
(3) Rim bolt (4) Rim
Specication
Wheel & axle mount-
ing bolt
123 - 152 lb.f
(17 - 21 kgf.m)
Wheel rim and disc
mounting bolt
123 - 152 lb.f
(17 - 21 kgf.m)
TIGHTENING TORQUE
PROPER INFLATION PRESSURE
Tire size
Ination
pressure
PSI
With ro-
tary tiller
Front
wheel
7-16
28
Rear
wheel
11.2-24
18
With
loader
Front
wheel
7-16
43
Rear
wheel
11.2-24
28
4035ch.indb 234035ch.indb 23 2020-09-18 오후 6:29:202020-09-18 오후 6:29:20