4
-
19
OPERATION DESCRIPTION
4
LEVER(LH/RH)
(1) MFWD Lever
(2) Range Shift Lever
(3) PTO Shift Lever
(4) Position control lever
RANGE SHIFT LEVER
The range gear is shifted in four lev-
els (A-B-N-C).
When shifting the range gear, stop
tractor and depress clutch pedal fully.
(1) Range Shift Lever
POSITION CONTROL LEVER
(1) position control lever
It is used to keep the implement con-
stantly at a certain position. A stop-
per is used to x the position control
lever in the “UP” position while driv-
ing on a road.
When lowering the implement, set
the position control lever, and the im-
plement will go down to the set posi-
tion.
4035ch.indb 194035ch.indb 19 2020-09-18 오후 6:29:172020-09-18 오후 6:29:17
To Next Page
Loading...
