Bad Boy 4035CH 2021 - Page 20

1
-
13
FOR SAFE OPRERATION
1
공구는
올바르게!
Use a cor-
rect tool
최대공기압이상
으로공기를넣지
마십시오.
Do not inate the
tire bead max air
pressure
Use correct tools;
•
Use proper tools to carry out
all maintenance procedure.
Also have available the re-
quired tools in the tractor at
all times.
If this instruction is ignored,
there is a risk of accident due to
poor maintenance.
CAUTION
Check electrical component and
wire harness;
•
Check before work if the wire
harnesses are burned or stuck
on any other component, if the
cord cover is peeled off or if
the wire connectors are loose.
If this instruction is ignored, the
electrical short can cause fire
and injury.
WARNING
Do not over inate tires;
•
When filling tires with air, do
not inate it beyond the max-
imum pressure stated in this
manual. (Refer to P5-22 of
Proper ination pressure)
If this instruction is ignored, the
tire may blow out, causing an
injury.
CAUTION
4035ch.indb 134035ch.indb 13 2020-09-18 오후 6:29:062020-09-18 오후 6:29:06