Bad Boy 4035H 2021 - Checking and Changing Coolant; Anti-Freeze

6
-
9
MAINTENANCE
6
1. To drain coolant, open the radiator
cap and drain plug and drain cool-
ant completely from the radiator.
2. Flush the radiator until clean water
is drained.
3. Add anti-freeze up to the filler
neck of the radiator.
4. Start and operate the engine for 5
minutes after filling the reservoir
tank with coolant up to the “FULL”
level. Stop the engine and check
if the coolant level is between the
“FULL” and “LOW” marks. If not,
add some coolant as needed.
REPLACEMENT PROCEDURE
ANTI-FREEZE
The anti-freeze is lowering the freez-
ing temperature of water. The tractor
is lled with appropriate genuine an-
ti-freeze at factory.
(1) Anti-freeze reservoir tank
(A) FULL (B) LOW
CHECKING AND CHANGING COOLANT
CHECKING
Open the hood and check if the cool-
ant level in the reservoir tank is be-
tween the "FULL" and "LOW" marks.
Add coolant through the ller if nec-
essary.
(1) Coolant reservoir tank
(A) FULL (B) LOW
4025h_4035h.indb 94025h_4035h.indb 9 2020-09-18 오후 6:23:232020-09-18 오후 6:23:23