4
-
17
OPERATION DESCRIPTION
4
RANGE SHIFT LEVER
3 speeds can be selected by the
range shift lever. Therefore, in total,
12 forward driving speeds and 12 re-
verse driving speeds are provided by
combination of the main shift lever
and range shift lever.
Make sure to operate the lever while
the tractor is stationary. Shift the le-
ver with the clutch pedal firmly de-
pressed.
(1) Range Shift Lever
The hand throttle lever is to increase
or decrease the engine rpm. This le-
ver is mainly used while working on
a eld with the constant engine rpm.
Increasing engine RPM
Decreasing engine RPM
HAND THROTTLE LEVER
Use the foot throttle pedal dur-
ing driving for travel, not the
hand throttle lever.
NOTE
PTO ON/OFF SWITCH
(1) PTO ON/OFF Switch
[IND]: In the IND position, the PTO
shaft rotates constantly re-
gardless of the position of the
rear implement.
[AUTO]: In the AUTO position, the
PTO shaft stops rotation
when the rear implement is
lifted to a certain level. The
PTO shaft rotates again as
soon as the rear implement
is lowered.
(1) Hand Throttle Lever
(A)
Low Speed (B) High Speed
4025h_4035h.indb 174025h_4035h.indb 17 2020-09-18 오후 6:23:162020-09-18 오후 6:23:16