Bad Boy 4035H 2021 - Checking Hoses and Pipes; Checking Electric Wiring

6
-
11
MAINTENANCE
6
CHECKING ELECTRIC WIRING
Open the hood and check if any ca-
ble is in contact with other parts, or if
any insulation is peeled off or dam-
aged, or if any contact is loose. Dam-
aged cables must be repaired by an
authorized dealer. Arrange for peri-
odic maintenance for cables every
50 hours or once a year even though
the cables are not damaged.
CHECKING HOSES AND PIPES
Check the fuel hose, hydraulic steer-
ing wheel hose (pipe), radiator hose,
etc. for damage or leakage. Check if
there is any loose bolt. Replace the
hoses and pipes every 2 years even
if not damaged.
CAUTION
•
To connect the battery, con-
nect its positive (+) cable rst.
To disconnect the battery, dis-
connect its negative (-) cable
rst.
•
If the amount of electrolyte is
excessive in each cell during
charging the battery, the metal
part of the tractor can be cor-
roded due to the spilled elec-
trolyte.
•
Avoid boost charging as pos-
sible.
•
Charge the battery after re-
moving it from the tractor.
•
When replacing the battery,
use the BAD BOY genuine bat-
tery.
•
Make sure that fuel does not
leak through the damaged fuel
hose.
DANGER
•
Before starting to work ev-
ery day, check if any cable is
in contact with other parts, or
if any insulation is peeled off
or damaged, or any contact is
loosened.
•
Before and after work, remove
any straw or dust on the bat-
tery or cables.
DANGER
4025h_4035h.indb 114025h_4035h.indb 11 2020-09-18 오후 6:23:232020-09-18 오후 6:23:23