Bad Boy 4035H 2021 - Running-In Period; Starting Engine; How to Start

5
-
3
OPERATION
5
RUNNING-IN PERIOD
▶
Within rst 10 hours of operation

Inspect daily or every 10 hours

Tighten the wheel bolts
▶
After rst 50 hours of operation

Tighten the wheel, disc and hub
bolts

Check the alternator and fan belt
tension as well as air inlet

Tighten the cooling system's
hose and clamp

Perform the scheduled 50-hour
maintenance
STARTING ENGINE
HOW TO START
1. Check the fuel gauge. Make sure
that a su󰀩cient amount of fuel is
in the tank.
IMPORTANT
•
Always keep wheel bolts
tightened to prevent any
accident. Confirm that the
wheel bolts are tight before
operation. Check wheel bolt
torque at least twice within
the rst 10 hours of operation,
check it periodically at every
50 hours thereafter. Change
the oil and filter after first 50
hours of operation.

Change the transmission/hy-
draulic oil and oil lter element

Change the engine oil and lter

Change the front axle uid
4025h_4035h.indb 34025h_4035h.indb 3 2020-09-18 오후 6:23:162020-09-18 오후 6:23:16